WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

We use top grade materials such as: Acetal, Nylon, Polypropylene, Polyethylene, KYNAR, PETP, PBT, PEEK, Ceramic and Stainless Steel in different combinations to meet specific needs. Jilson’s housings for plastic bearings are made of high-grade, solid PBT thermoplastic polyester. ball bearings are ideal for: food and beverage industries, photo processing facilities, major appliance or furniture industries, many marine applications, chemical and electroplating industries, paint and dye manufacturers, textile industries, automotive manufacturing or service, water treatment plants, pharmaceutical industries, outdoor applications and more. 

SRG is known for their unique corrosion resistant ball bearings, and high quality in both materials and manufacturing are always our primary considerations.Most bearing failures today are caused by corrosion. SRG Bearings' ball bearings can be utilized in environments destructive to conventional bearings. They can operate in hostile environments such as sea water, film processing solutions and swimming pools. In many cases the medium can be used as a lubricant.

Many times a bearing is mounted into another part, such as a plastic pulley, sprocket, wheel or a mounted block. Utilizing the design concept of a ball bearings, KMS Bearings, Inc., can integrate the mating component as the raceway of the bearing, ie: pulley as the outer ring, or the shaft as the inner ring. The end result is fewer parts, reduced assembly time, and overall lower cost.For an example of actual integrated plastic race skf bearings click on special bearings and for an animated graphic of product integrating click on design flexibility.

ball bearings become completely non magnetic when fitted with either polymer, glass, or non magnetic 316 stainless balls. They are ideal for use where there can be no magnetic distortion.ball bearings are naturally clean because they do not corrode or require lubrication. They are ideal for wash down applications and clean room environments. Plastics have the inherent ability to dampen vibrations. Add lubrication and they become virtually silent.

Plastics absorb shock loads better than metal due to their elastic nature. Many conventional radial ball bearings fail due to brinelling of the raceway, ie: balls denting the raceway. There are three reasons steel bearings require lubrication; to reduce friction, dissipate heat and resist corrosion. Plastic, by nature, does not corrode. Due to the design of iko bearings, there is no metal to metal contact, resulting in less friction; therefore dissipating heat becomes less critical.ball bearings run freer and naturally have low inertia due to the low coefficient of friction between plastic and stainless. Two other factors contributing to low inertia are the ability to run without grease and being lighter in weight.

Ball bearings are special ball bearings with several recirculating ball tracks. These bearings ensure that a machine element can move in a straight line along a shaft with little friction. Schaeffler Group Industrial offers ball bearings in compact, light and machined ranges. Various ball bearings of the light range do not have an outer ring but several raceway plates on the outside diameter of the bearing on which the balls in the linear bearing roll. The mating track for all ball bearings is an INA shaft made from precision machined steel. 

"Buy ball bearings" allow friction-free and smooth linear movement. Possible misalignments in the adjacent construction of up to +/- 40 angular minutes can be compensated.Solid shafts are made from quenched and tempered steel or corrosion-resistant steel. They can have various end face configurations depending on customer requirements: thes include flat ends, ground journals, threaded journals or threaded holes.

UCP314DI

315DI

UCP314