WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

First Bronze offers a complete line of stock plain bearings, "flanged bearings" and washers made of P/M bronze. First Bronze sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. 

After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F. Consult First Bronze if application requires higher temperatures or other specific operating conditions.

Ball Bearings 9mm x 17mm x 5mm Flanged Bearings Lot of 10 Bearings 10 Flanged Ball Bearings, this is a popular size that could be used in many application that uses this size 9mm x 17mm x 5mm. Bearings are made of Stainless Steel. * Item: Flanged Double Shielded Ball Bearings * Type: Deep groove ball bearings * Closures: 2 Metal Shields * Size: 9mm x 17mm x 5mm * Quantity: 10 Bearings * Dynamic load rating Cr: 1,350 N * Static load rating Cor: 660 N * Limiting Speed: * Grease Lubrication: 39,000 RPM * Packing: 10 bearings in One plastic tube 

Bunting Bearings FFB610-10 3/8” Bore x 5/8” OD x 1 1/4” Length 7/8” Flange OD x 1/8” Flange Thickness Powdered Metal SAE 841 Flanged Bearings

Bunting Bearings offers a complete line of stock plain bearings, flanged bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze nsk bearings should function satisfactorily in temperatures ranging from 10°F to 220°F. 

SKF flanged stainless steel bearings are available in an open design, designation suffix R and a shielded version, with a Z shield at both sides, designation suffix 2ZR 

The bearings have the same internal design, including the cage, as the corresponding bearings without flange. They are able to accommodate the same loads, operate at the same speeds, and the shielded fag bearings are filled with the same grease.

69349-69310

DAC25520037 ZZ

DAC35650035 ZZ