WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

Rolling bearings for predominantly radial loads are described as radial bearings. Most radial bearings can support combined loads, e.g. deep groove ball bearings, angular contact ball bearings, tapered roller bearings or spherical roller bearings. Cylindrical roller bearings N, NU, most [plain bearings] , drawn cup needle roller bearings and needle roller and cage assemblies can only support radial loads.

Rolling bearings for predominantly axial loads are described as axial bearings. Axial spherical roller bearings and single direction axial angular contact ball bearings can support combined axial and radial loads. The other types of axial bearings are only suitable for axial loads.If there is little radial space available, bearings with a low cross-sectional height must be selected, such as needle roller and cage assemblies; needle roller bearings with or without an inner ring, deep groove ball bearings and spherical roller bearings of certain series. 

If there is little axial space available, bearings series including single row cylindrical roller bearings, deep groove ball bearings or angular contact ball bearings are suitable for radial and combined loads. For axial loads, axial needle roller and cage assemblies, axial needle roller bearings or axial deep groove ball bearings are used. 

A further feature is how the bearings guide a shaft. There are bearings that allow axial displacements, bearings that guide a shaft in one or both axial directions and ina bearings that allow angular adjustment and thus tolerate misalignment of the adjacent construction. 

The bearing size is determined primarily by the magnitude and type of load – dynamic or static – the bearing load carrying capacity and the requirements for operating life and operational reliability of the bearing arrangement. Rotating bearings are subjected to dynamic stresses. Bearings are subjected to static stresses if there is only very slow relative motion between the bearing rings, if swivel motion occurs or if loads occur in a stationary condition. Where external dimensions are identical, roller bearings can in general be subjected to higher loads than ball bearings. As a result, ball bearings are usually used for small and moderate loads, whilst roller bearings are frequently used for higher loads and larger shaft diameters.

The function of plain bearing arrangements, like rolling bearing arrangements, is to support or guide parts that are movable relative to each other. They must support and transmit the forces occurring in this case. Whereas the bearing arrangement elements in rolling bearing arrangements are separated from each other by means of rolling parts - rolling elements - the movable component in plain bearing arrangements - normally a shaft, stud or strip - slides on the sliding surface of a static bearing bush, bearing cup or sliding strip. The sliding motion occurs directly between the sliding layer of the bearing body and the part that is supported. Lubrication is ensured by embedded lubricants or a solid layer applied to a supporting body. In radial motion, the clearance between the shaft and sliding layer ensures the mobility of the sliding partners.

Plain bearings are available as radial bearings, axial fag bearings, strips, cups and in many other designs. They run quietly and are particularly suitable where high loads must be supported under relatively slow rotary and swivel motion and at low and high temperatures. Due to their versatile specific characteristics, they are therefore used in almost all areas of industry and especially where the space available for the ntn bearing arrangement is very limited.

PHG25MMH100

7010CD/P4ADRA ITALY V 703 347D

T310