flanged ball bearings
Flanged Ball Bearings
Many ball bearings have flanges as options to their configurations. The flange is designed to aid in mounting and positioning. This is especially true for miniature and instrument bearings but applies to other ball bearing types. To see various types of flanged ball bearings (non-mounted), please visit the links below:
Flanged Miniature and Instrument Ball Bearings
Flanged R-Series Ball Bearings
Flanged, Tapered Outer Ball Bearings
Flanged Thin Section Ball Bearings
Flanges are also used with bearings on external housings used to mount a bearing unit.
A mounted bearing unit acts as a system to position the bearing securely for reliable
operation. To learn more about flanged mounted bearing units,Bearings with a flange on the outer ring simplify axial location. The housing for such bearings can consist of a through-hole of uniform diameter, but the entry face of the housing (which may be either the outer or inner face) must be machined truly normal to the hole axis. However such flanges are very expensive to manufacture. A more cost effective arrangement of the bearing outer ring, with similar benefits, is a snap ring groove at either or both ends of the outside diameter. The snap ring assumes the function of a flange.
Flanged Deep Groove Ball Bearing SMF84ZZ
1. ISO9000 Quality
2. Quick delivery good service
3.22years suppliy bearings
Flanged Deep Groove Ball Bearings SMF84ZZ
Item: SMF84ZZ Flanged Ball Bearing
Type:Deep Groove Ball Bearing
Closures: Metal Shields
Inner Diameter: 4mm
Outer Diameter: 8mm
Width: 3mm
Size: 4mm x 8mm x 3mm
Quantity: One Bearing
Dynamic load rating Cr: 0.40 KN
Static load rating Cor: 0.14 KN
Limiting Speed:
Grease Lubrication: 61,000 RPM
Flanged Deep Groove Ball Bearings: Manufactured to the same principal sizes as standard bearings with metal shields these have an additional flange to allow fitting into housings flush against the shoulder of the flange. They are often used on steel tracks as guides and supports Benefits: Cost effective replacement bearing, Flanged designFlanged miniature bearings are available open, shielded or sealed.with bore sizes as small as 1mm. The smaller sizes are sometimes referred to as instrument bearings.
Available in SAE52100 chrome steel and AISI440C or KS440 (ACD34/X65Cr13) stainless steel, these metric sized deep groove radial flanged miniature bearings can withstand heavy radial loads and moderate thrust loads in both directions. Flanged miniature bearings have an outer ring flange to facilitate location in a housing.Many of these flanged miniature bearings can be supplied to order with ceramic balls (hybrid bearings). Most sizes are available in stainless steel
