WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

Needle bearings are roller bearings and rollers which have higher length-to dimension ratios. Needle roller bearings are widely-used with farm and building equipment, motor vehicle transmissions, modest appliance and instrument motors, alternators, small fuel engines, gear pumps and plane controls.

Needle bearings are generally lubricated with grease, but oil or oil-mist lubrication is favored for heavy-duty or high-speed applications. Lots of light-duty needle bearings never need relubrication, but high loads or speeds require it.

In contrast to some other roller bearings, needle roller bearings have a lot smaller rollers for any provided bore size. Needle bearings hold the best load capacity to get a certain radial space in all rolling-element bearings, however their use is fixed to bore diameters under 10 in.

All with needle bearings are variants of two basic types. First needle bearing pattern, full complement, features the complete complement of needles and has no retainer. The minute needle bearing design, caged needle, has a retainer and also cage for roller assistance and spacing. Caged needle bearings have scaled-down roller complements and lower load capacities in comparison to full-complement bearings. Needle bearings possess the advantage of a better speed capacity; retainers avoid high-velocity rubbing concerning adjacent needles and supply better roller guidance. Needle bearings offer greater lubricant capacity.

Loose - needle bearings are simply just a full complement of needles inside annular space in concerning 2 hardened machine ingredients, which make up that bearing raceways. Full complement needle roller bearings offer an efficient and cheap bearing putting your unit together with modest speed ability, but they're responsive to help misalignment.

Caged assemblies are simply just a roller complement having a retainer, placed between 2 hardened machine elements that behave as raceways. Their own speed capability is approximately 3 times higher than those of loose - needle bearings, even so the smaller complement of needles lowers load capacity for the caged assemblies.

Drawn-cup, full-complement needle roller bearings add a deep-drawn cup (the outer race) with a full complement of needles. In certain needle bearings that needles are retained via the cup lips, in others they're kept just by its grease. Spherical-ended, instead of trunnion-ended, rollers are employed in the grease-retained needle bearings, which provide a slight gain in download capacity.

Drawn-cup, caged needle roller bearings are dimensionally similar to full-complement bearings, with the exception that the retainer is used. As always, the retainer and lowered complement supply higher speeds and decreased insert capacity. Additionally, the caged bearing has relatively better tolerance for misalignment as compared to full-complement needle bearing.

Heavy-duty needle roller bearings are released with comparatively heavy outer rings, produced from hard and precision-ground materials. The needle bearing load capacity is higher due to the retainer-guided end-relieved rollers.

Cam followers or monitor followers needle roller bearings are heavy-duty needle bearings with either a vital stud or a nonseparable inner ring allowing a yoke-mounting stud. The fundamental follower may include nearly every mixture of special features for example seals, self-lubricating rings, eccentric-mounted studs, crowned external races, heavy-duty studs, and then a number of platings together with coatings.

Aircraft needle roller bearings are heavy-duty compact assemblies that create maximum load capacity with static, oscillating, or little by little rotating conditions. The single-roller needle bearings possess low tolerance to misalignment. Some double-roller types possess two-piece outer race which compensates for misalignment. An amazing array are supplied with grooves and oil holes for relubrication from the shaft or housing.

Thrust needle roller bearings are caged bearings with rollers assembled like the spokes of the wheel inside a waferlike retainer. These needle bearings can run with pretty high speeds, in spite of some continuous slippage between the roller and raceway floors, which occurs as that rollers are cylindrical not tapered.