DEEPGROOVEBALLBEARINGS
Deep Groove Ball Bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders).
Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation. Consequently, they are available in many executions and sizes.
Deep groove ball bearing have various types in structure, beside open type bearings, shield or seals at both side can also be provided
Deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway, the bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings.
for shaft diameter
in mm
160 15 - 380
42..-B 10 - 90
43..-B 15 - 60
60 7 - 360
618 45 - 850
619 40 - 80
62 3 - 280
622..-2RSR 10 - 50
63 4 - 240
623..-2RSR 15 - 50
64 17 - 90
S60 10 - 60
S60..-2RSR 10 - 50
S62 10 - 60
S62..-2RSR 10 - 45
S63 10 - 45
S63..-2RSR 10 - 50
